Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pinpoint Test A: DTC B2103




Anti-Theft

Pinpoint Test A: DTC B2103

Normal Operation

The Passive Anti-Theft System (PATS) transceiver reads the PATS (Passive Anti-Theft System) key when the key is turned to START or ON.

- DTC B2103 (Antenna Not Connected)- sets when there has been a PATS (Passive Anti-Theft System) transceiver antenna failure.

This pinpoint test is intended to diagnose the following:

- PATS (Passive Anti-Theft System) transceiver

PINPOINT TEST A : DTC B2103

A1 INSPECT THE PATS (Passive Anti-Theft System) TRANSCEIVER FOR CORRECT INSTALLATION

NOTE: Replacement of the PATS (Passive Anti-Theft System) transceiver does not require the PATS (Passive Anti-Theft System) keys to be programmed into the Instrument Cluster (IC) again.

- Ignition OFF.

- Verify the PATS (Passive Anti-Theft System) transceiver is correctly installed. Refer to Passive Anti-Theft System (PATS) Transceiver .

- Connect the scan tool.

- Ignition ON.

- Enter the following diagnostic mode on the scan tool: Clear the IC (Instrument Cluster) DTCs.

- Ignition OFF.

- Ignition ON.

- Enter the following diagnostic mode on the scan tool: Retrieve the IC (Instrument Cluster) DTCs.

Is DTC B2103 retrieved?

Yes
INSTALL a new PATS (Passive Anti-Theft System) transceiver. REFER to Passive Anti-Theft System (PATS) Transceiver . CLEAR the DTCs. CYCLE the ignition. REPEAT the self-test.

No
The system is OK.