Front Door Panel: Service and Repair
Door Trim Panel - Front
Removal and Installation
1. Remove the front door trim panel pull handle.
- Remove the pull handle cover.
- Remove the pull handle screws.
- To install, tighten to 2 Nm (18 lb-in).
2. Remove the front door inside handle bezel screw and bezel.
3. If equipped with manual windows, remove the manual window handle retaining clip and the handle.
4. Remove the 9 front door trim panel screws.
5. Remove the front door trim panel.
- If equipped, disconnect the power mirror switch electrical connector.
- Pull the bottom of the front door trim panel outward.
- Lift the front door trim panel upward.
6. To install, reverse the removal procedure.