Installation

INSTALLATION

1. Using a Transmission Jack, raise the Fuel Tank.




2. Reconnect the Evaporative Emission Vent Line (1) to the Fuel Tank (2).




3. Install the Center Fuel Tank Strap (1). Tighten strap bolt to 56 Nm (41 ft. lbs.).
4. Reconnect the Fuel Feed line (2) and Fuel Return line (3).




5. Reconnect the harness connector (1).




6. Install the Fuel Filler Tube Grommet (3).
7. Reconnect the harness connector (1).




8. Install the front and rear Fuel Tank Straps (2). Tighten strap bolts to 56 Nm (41 ft. lbs.).




9. Install the tie straps (2).




10. Install the Fuel Filler Tube (2) and the Fuel Filler Tube Fastener (1).




11. Install the Fuel Filler Tube Panel (2) and install the 4 Fuel Filler Tube Panel Fasteners (4).
12. Install the Fuel Filler Door (3) and the Gas Cap (2), then install the 2 Fuel Filler Door Fasteners (1).