Removal

REMOVAL




1. Remove brake caliper with support.
2. Remove axle shaft.
3. Back-off parking brakes.
4. Remove outer hub nut (1) with Wrench 10095.
5. Remove locking plate (2), inner hub nut (1) and thrust washer (3).

CAUTION: Thrust washer is designed for left or right side and are not interchangeable.

6. Pull hub off axle tube.




7. Remove front hub bearing (1) from hub (2).




8. Drive out ABS sensor tone ring (1) hub seal (2) and rear bearing (3) from hub.
9. Remove inner and outer bearing cups from hub with a hammer and brass drift.