SRW
DISC BRAKE CALIPERS - FRONTREMOVAL (SRW)
1. Unscrew the cap from the brake fluid reservoir.
2. Raise and support the vehicle.
3. Remove the front wheels .
4. Remove the wear indicator cable and the wear indicator (Fig. 9).
NOTE: Seal off the line ends and connection threads in the brake calipers with plugs. Also check brake hoses for signs of cracks.
5. Remove the brake hose at the brake caliper (Fig. 9).
6. Remove the brake caliper guide bolt (Fig. 9).
7. Remove the brake caliper (Fig. 9).
INSTALLATION (SRW)
1. Install the brake caliper to the brake caliper adapter (Fig. 9). Tighten the guide pins to 25 Nm (221 inch lbs.).
NOTE: Do not install the brake hose twisted and ensure freedom of movement.
2. Install the brake hose at the brake caliper (Fig. 9). Tighten the bolt to 14 Nm (124 inch lbs.).
3. Install the wear indicator cable and the wear indicator (Fig. 9). Tighten to 10 Nm (89 inch lbs.).
4. Bleed the brake system.
5. Check the brake system for any leaks.
6. Install the front wheels.
7. Lower the vehicle.