Clearance Lamp Bulb: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the clearance lamp unit from the vehicle, but do not disconnect it from the vehicle wire harness.

Clearance Lamp Bulb Remove/Install:

3. Pull the clearance lamp away from the vehicle far enough to access the bulb holder on the back of the lamp housing.
4. Rotate the bulb holder counterclockwise about 30 degrees and pull it straight out from the lamp housing.
5. Remove the bulb from the clearance lamp bulb holder.

INSTALLATION
1. Install the bulb into the clearance lamp bulb holder.
2. Insert the bulb holder into the back of the clearance lamp housing and rotate it clockwise about 30 degrees to lock it into place.
3. Reinstall the clearance lamp onto the vehicle.
4. Reconnect the battery negative cable.