Stabilizer Bushing: Service and Repair

BUSHINGS

REMOVAL
1. Remove the lower control arm.
2. Install the lower control arm in a vise.





3. Install special tool C-4212F (Press) with special tool 9302-1 (Driver) and 9302-3 (Receiver) (Fig. 1).





4. Press out the old control arm bushing.

INSTALLATION
1. Install the new control arm bushing into the control arm.





2. Press the new bushing into the control arm using special tool C-4212F and 9302-1 (Driver) with 9302-2 (Sizer cup) and 9302-4 (Receiver) (Fig. 2).
3. Press the bushing in all the way until the lip is seated properly into the control arm.
4. Install the lower control arm to the vehicle