Drivetrain- Propeller Shaft Center Bearing With Protective Caps
Date: October 11, 2010Order No.: V-B-41.10/01a
Supersedes: V-B-41.10/01, February 9, 2010
Group: 41
Revision a:
Revised for Retrofit Information
SUBJECT:
MY-All, Model 906
Use of Modified Propeller Shaft Center Support Bearing with Protective Caps
The center support bearing without protective caps, which was previously described as noninterchangeable, can now be retrofitted on a bearing with protective caps.
Only perform the retrofit once and where a customer has a complaint. Warranty claims will not be awarded for replacing the propeller shaft.
See relevant WIS documents copied here: AR41.10-D-0050H, AR41.10-D-0101H , AR41.10-D-0101HA, and AR41.10-D-0101I for removal and assembly instructions.
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records.
Parts Information