With Mechanical Clutch

Description:

1. Disconnect clutch fork return spring at fork.

2. Loosen Nut "A," and back off from swivel about 1/2".

3. Hold clutch fork push rod against fork to move clutch release bearing against clutch fingers (push rod will slide through swivel at cross-shaft).

4. Adjust nut "B" to obtain 2/16 to 1/4" clearance between nut "B" and swivel.

5. Release push rod, connect return spring and tighten nut "A" to lock swivel against nut "B".

6. Check free pedal travel which should be 1 1/4 to 1 1/2 inch.