Front Housing Assembly

^ Tools Required:
- J 36183 input Shaft Press Tube with Cap
- J 36184 Adapter Press Tube Reducer
- J 36507 Detent Bushing Remover and Installer
- J 36798-1 Shift Shaft Bushing Installing Tool
- J 36190 Drive Handle

ASSEMBLE

1. Press in bearing until snap ring is seated using J 36183, J 36184, and hydraulic press.





2. Shift shaft front housing bushings using J 36798-1 and J 36190.





3. Two detent plunger bushings, using J 36507.
A. Install the first bushing until the second scribe mark on the tool is aligned with the housing.
B. Install the second bushing until the first scribe mark on the tool is aligned with the housing.
4. Breather assembly.