Auxiliary Unit

Removing Blower Fan Cage:

Remove or Disconnect
1. Negative battery cable.
2. Right rear quarter trim panel cover.
3. Electrical connectors.
4. Screws (29).
5. Cooling tube.
6. Blower motor (28).
7. Fan cage from the motor.

Install or Connect
1. Fan cage to the motor.
2. Blower motor (28) to the heater case.
3. Tighten Screws (29) to 1.7 Nm (15 lb in).
4. Cooling tube.
5. Electrical connectors, as necessary.
6. Right rear quarter trim panel cover.
7. Negative battery cable.

- Check circuit operation.