Enabling the SIR System

Driver Side
1. Turn ignition switch to LOCK and remove key.
2. Connect yellow two-way connector and install connector position assurance (CPA).
3. Install steering column filler panel.
4. Insert air bag fuse into fuse block.
5. Turn ignition switch to RUN and verify that the air bag warning lamp flashes seven times then turns off.

Passenger Side
1. Turn ignition switch to LOCK and remove key.
2. Insert air bag fuse into fuse block.
3. Turn ignition switch to RUN and verify that the air bag warning lamp flashes seven times then turns off.