Air Cleaner Housing: Service and Repair

Air Cleaner Components:

Removal Procedure
1. Remove the Crankcase Depression Regulator (CDR) hose (3).
2. Remove the inlet elbow (5).
3. Remove the air cleaner mounting bolts (2).
4. Remove the air cleaner assembly (1).
5. Inspect the CDR hose (3) for cracks or binds.
6. Inspect the air cleaner cover (1) seals for damage.
7. Inspect the air cleaner filter for damage or excessive dirt accumulation. Replace any part which shows any of the above conditions.

Installation Procedure
1. Install the air cleaner assembly (1).
2. Install the air cleaner mounting bolts (2).

Tighten
- Tighten the bolts to 12 Nm (96 lb. in).

3. Install the CDR hose (3).
4. Install inlet elbow (5).