General Operation

1. In order to operate the Compact Disc player, perform the following steps:
1.1. Press the PWR knob to turn the system On.
1.2. Insert a disk part way into the slot, label side up.
1.3. Wait a few seconds.
1.4. The disk should then begin to play, and a CD symbol will appear in the display.
1.5. If the disc is very hot, or if you're driving on a very rough road, a disc may come out or just not play.
When the disc player is too hot to play a disc, ERR will appear on the display.
2. When the disc player returns to normal temperature, the disc should play again. If the disc still will not play, check for the following possible problems:
^ An upside down disc
^ A dirty, scratched, or wet disc
^ Too much moisture in the air
If there is too much moisture in the air, wait about one hour and try again.
^ The vehicle is operating on a very rough road.