Throttle Position Sensor: Specifications

Note: The Typical Scan Data Values are an average of display values recorded from normally operating vehicles. The Typical Scan Data Values are intended to represent what a normally functioning system would display. The values you get may vary due to a low battery charge or other reasons. But they should be very close. Use the Typical Scan Data Values only after the On-Board Diagnostic system check and finding the on-board diagnostics function properly with no diagnostic codes displayed. Engine must be at operating temperature, idling in Closed loop, Closed throttle, Park or Neutral, and accessories OFF.

TP Sensor Voltage

0.47 Volts (V)