Seat Adjuster Replacement - Front (Power)

SEAT ADJUSTER REPLACEMENT - FRONT (POWER)

REMOVAL PROCEDURE
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion frame from the seat adjuster.




4. Remove the inboard seat belt buckle and nut (1). Disconnect the electrical connection (2).
5. Remove the seat back frame from the seat adjuster.
6. Remove the seat back hinge/recliner mechanism.
7. Remove the seat adjuster track cover.
8. Remove the memory module, if equipped.

INSTALLATION PROCEDURE
1. Install the memory module, if equipped.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the inboard seat belt buckle and nut (1).

Tighten
Tighten the nut to 53 N.m (39 lb ft).

3. Connect the electrical connection (2).
4. Install the seat adjuster track cover.
5. Install the seat back hinge/recliner mechanism.
6. Install the seat back frame to the seat adjuster.
7. Install the seat cushion frame to the seat adjuster.
8. Install the seat trim panel.
9. Install the seat in the vehicle.
10. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration Procedure.