Steering Gear Protection Shield Replacement

Steering Gear Protection Shield Replacement

Removal Procedure

1. Notice:
Refer vehicle Lifting.

Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the bolts (3) retaining the steering gear protection shield to the steering gear.
3. Remove the steering gear protection shield from the vehicle.

Installation Procedure





1. Install the steering gear protection shield to the steering gear.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the steering gear protection shield retaining bolts (3) to the steering gear.
^ Tighten the bolts to 180 Nm (132 ft. lbs.).
3. Lower the vehicle.
4. Perform a four wheel alignment.