6. Case Extension Assembly Removal

^ Tools Required
- J 23129 Universal Seal Remover
- J 6125-1B Slide Hammer





1. Remove the prop shaft front slip yoke seal assembly (20) (model dependent) with the J 23129 and the J 6125- 1B.





2. Remove the case extension bolts (21).
3. Remove the case extension assembly (19).
4. Remove the case extension seal (15).
5. Inspect the following parts for damage and wear:
^ The output shaft seal (675) (for some models)
^ The transmission output shaft yoke seal (682) and output shaft seal (683) (for some models)
^ The case extension ball bearing assembly (17) (for some models)
^ The bushing for damage and wear