60. Overrun Clutch Assembly Assemble

^ Tools Required
- J 38729 Overrun Clutch Piston Seal Protector
- J 38734 Intermediate Spring Compressor Adapter
- J 23327 Clutch Spring Compressor





1. Install the J 38729 onto the overrun clutch housing (504).
2. Lubricate the overrun clutch piston seal with DEXRON III transmission fluid.
3. Assemble the overrun clutch piston (505) into the overrun clutch housing (504).

Important: Keep the overrun clutch piston (505) level, while rotating, in order to avoid damaging the seal.

4. Rotate the overrun clutch piston (505) in order to aid in assembly.





5. Place the overrun clutch spring assembly (506) onto the overrun clutch piston (505).
6. Compress the overrun clutch spring assembly (506) using the J 23327 and the J 38734.
7. Install the overrun clutch spring retainer ring (507).





8. Install the overrun clutch plates (508, 509).
9. Alternate the clutch plates, starting with the steel clutch plate (508) (3 steel, 3 composite).
10. Install the overrun clutch backing plate (510).





11. Install the overrun clutch backing plate retainer ring (511).