Clean Air Cover and Gasket

Remove or Disconnect
1. Clean air cover attaching screws (42).
2. Clean air cover (41) and gasket (43).
- Discard gasket.

Clean
- Gasket sealing surface.

Install or Connect
1. New clean air cover gasket (43) on throttle body.
2. Clean air cover (41).

Notice: See "Service Precautions." Service Precautions

3. Lean air cover attaching screws (42).
Tighten
- Clean air cover attaching screws to 3.4 N.m (30 in.lbs.).