Without A/C

Wiring Harness Installation:

Blower Motor Case Assembly:

REMOVE OR DISCONNECT


1. Electrical connection (78) from resistor (80).

2. Screws (79).

3. Resistor (80) from blower case (49).


INSTALL OR CONNECT

1. Resistor (80) to blower case (49).


NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."


2. Screws (79).

- Tighten screws (79) to 2 Nm (18 in. lb.).

3. Electrical connector (78) to resistor (80).

- Check circuit operation.