Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 1992 >> Syclone V6-262 4.3L Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Blower Motor Replacement >> Without A/C

Without A/C

Wiring Harness Installation:




Blower Motor Case Assembly:






REMOVE OR DISCONNECT

1. Electrical connector (77) from blower motor (53).

2. Blower motor flange screws (87).

3. Cooling tube.

4. Blower motor (53).

5. Blower motor fan.

Inspect

- Blower motor terminals for corrosion. Clean corrosion from the terminals or replace the blower motor (53) as necessary.

- Flange of the blower motor (53) for damage or distortion that could cause an air leak. Repair as necessary.

- Blower fan for damage and distortion. Repair or replace as necessary.


INSTALL OR CONNECT


1. Blower motor fan.

2. Blower motor (53).

3. Cooling tube.

NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."

4. Blower motor flange screws (87).

- Tighten screws (87) to 2 Nm (18 in. lb.).

5. Electrical connector (77) to blower motor (53).

- Check circuit operation.
pro multis · About Operation CHARM