Main Unit

Control Assembly Replacment:

Remove Or Disconnect
- Instrument cluster trim plate.
- Control assembly by releasing the snap-fit retainers with a small screwdriver.
- Electrical connection.
- Cables from the control assembly by releasing retainers.
- Blower switch.
- Remove the blower switch rotary knob and the retaining clip from the shaft of the blower switch.

Install Or Connect
- Blower switch. Hold the blower switch in position and install the retaining clip. Install the blower switch rotary knob.
- Cables to the control assembly.
- Electrical connection.
- Control assembly to the instrument panel by snapping in.
- Instrument cluster trim plate.

- Check Circuit Operation