Valve Body and Wiring Harness

VALVE BODY AND WIRING HARNESS

Valve Body Bolt Location:

Control Valve And Pressure Switch Assembly:

Manual Valve Link:

Valve Body Checkballs:

Case Checkballs And Filters:

REMOVE OR DISCONNECT
1. Electrical connections from components.
2. TCC PWM Solenoid Retainer Clip (379) and Solenoid (396).
3. TCC Solenoid bolts (68) and solenoid assembly (66) with 0-ring seal (65) and wiring harness.
4. Pressure switch assembly bolts (70) and pressure switch assembly (69).
5. Accumulator cover bolts (58 and 59) and 1-2 accumulator cover and pin assembly (57).
6. 1-2 accumulator piston (56) and seal (55).
7. Spring (54).
8. Dipstick stop bracket (93).

REMOVE OR DISCONNECT
1. Bolt (64) and manual detent spring assembly (63).
2. Wiring harness retaining bolts.

REMOVE OR DISCONNECT
1. Remaining valve body bolts (62).
2. Manual valve link (89).
3. Control valve assembly (60).
4. Bolts (58 and 59), accumulator cover (57), piston (56, spring (54) and spring (54A).
5. Bolts (77) and plate (53).
6. Spacer plate (48) and spacer plate gaskets (47 and 52).
7. Spring (46), piston (44), and pin (43).
^ Seven checkballs are located under the valve body and one is located in the case. The large copper flash colored ball is # 1A checkball (91).