Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair

REMOVAL PROCEDURE
The knock sensor is located on the top rear of the engine.
1. Disconnect the negative battery cable.
2. Remove the wiring harness connector from knock sensor.
3. Remove the knock sensor from the rear of the engine.

INSTALLATION PROCEDURE
1. Install the knock sensor. Tighten to 19 Nm (14 lb. ft.).
2. Connect the negative battery cable.