Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 1997 >> C 2500 Suburban 2WD V8-5.7L VIN R >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> EEPROM Programming
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EEPROM Programming

CAUTION: The ignition should always be "off" when installing or removing the Vehicle Control Module (VCM) connectors.

1. Take the following steps in order to set-up for the EEPROM Programming.

^ Battery is charged.
^ Ignition is "ON."
^ Battery/cig. lighter Connection secure.
^ Data Link Connector (DLC).

2. Refer to up-to-date Techline terminal/equipment user's instructions.

3. If Vehicle Control Module (VCM) fails to program, do the following:

^ Check all VCM connections.
^ check Techline terminal/equipment for latest software version.
^ Try again to program the VCM. If it fails again, replace the VCM. Refer to VCM replacement.

4. Perform the Idle Air Control (IAC) valve reset procedure with the scan tool. use misc. test.
5. For a functional check perform one of the steps:

^ Use the Techline terminal and equipment in order to perform the On-Board Diagnostic (OBD) System Check
^ Refer to Powertrain OBD System Check. Testing and Inspection
pro multis · About Operation CHARM