Gear Reduction and Drive Group

Gear Reduction And Drive Group:

DISASSEMBLE
1. Housing bolts.
2. Armature support bracket.

Important
^ Washers may stick to the bracket or to the driveshaft and clutch group as the bracket is removed. In either case, note the position and number of each of these washers.

3. Washers.
^ Save the washers to be installed in the same position and number at assembly.
4. Drive housing plug and plate.
^ Pry out the drive housing plug with a large screwdriver.
5. Shift lever nut, washer, and screw.
6. Shift lever and driveshaft and clutch group from the drive housing together, then separate them.
^ Do not remove the bushing plug or bushing from the drive housing unless replacement is necessary. Refer to "Cleaning, Inspection, and Repair".