Front Wiper Motor

Description:

REMOVE OR DISCONNECT
1. Wiper drive system module from vehicle.
2. Drive link (P) from wiper motor assembly (8) crank arm using J 3923 2.
3. Two bolts (11) and wiper motor assembly (8) from wiper drive system module (10).

INSTALL OR CONNECT
1. Wiper motor assembly (B) on wiper drive system module (10) with two bolts (11).

Tighten
^ Two bolts to 8 Nm (71 lb. in.).

2. Drive link (P) on wiper motor assembly (B) crank arm using J 39529.
3. Wiper drive system module on vehicle.
4. Operate wipers and check for proper operation.