Preliminary Inspection

Before making any adjustments affecting caster, camber, or toe-in, the following front end inspection should be made.

INSPECT
1. Tires for proper inflation pressure.
2. Hub and bearing assemblies for excessive wear.
3. Ball joints, the rod ends, relay rods and idler arm.
4. Tires and wheels for runout.
5. Vehicle trim heights: Refer to "Trim Height Specifications." Any corrections must be made before adjusting caster, camber, or toe-in.
6. Steering gear for looseness at the frame.
7. Shock absorbers for leaks or any noticeable noise.
8. Control arms or stabilizer shaft attachments for looseness.
9. Alignment equipment. Follow the manufacturer's instructions.
10. Level of the vehicle. The vehicle must be on a level surface, fore, aft, and side to side.