Battery Replacement

Battery Tray:

REMOVE OR DISCONNECT
1. Negative cable from the negative battery terminal.
2. Positive cable from the positive battery terminal.
3. Battery hold-down retainer.
4. Battery.
Inspect
A. Battery for damage.
B. Cables and connectors for corrosion or wear.
C. Carrier for damage or foreign objects.
^ If damage is noted, find and correct the cause.

Battery Tray:

INSTALL OR CONNECT
1. Battery into cleaned carrier.
2. Hold-down retainer.
Tighten
^ Retainer bolt to 23 N.m (17 lb ft).
3. Positive cable and positive battery terminal to the battery.
4. Negative cable and negative battery terminal to the battery.
Tighten
^ Side terminals to 15 N.m (11 lb ft).