Propeller Shaft Runout Specifications

Front Check
One Piece 0.25 inch
Two Piece
Front Piece 0.25 inch
Rear Piece -
Center Check
One Piece 0.050 inch
Two Piece
Front Piece 0.005 inch *
Rear Piece 0.030 inch **
Rear Check
One Piece 0.025 inch
Two Piece
Front Piece -
Rear Piece 0.030 inch

* This measurement must be taken on the ground surface near the spline with the rear propeller shaft removed.
** This measurement must be taken with the rear propeller shaft mounted on the front shaft which is within specifications.