Remote Compact Disc Player

^ With the remote compact disk player option, a single compact disc (CD)can be played.
^ In order to load a CD into the player, hold the disc label side up and insert it approximately halfway into the player.
The disc will automatically be pulled the rest of the way into the player.
^ If the radio is OFF and the ignition is ON when a CD is inserted, the radio will turn on and begin playing the CD.
^ It is possible to load and unload CD's with the ignition OFF.
In order to load a disc with the ignition OFF, press the eject button on the remote player and then insert the disc.
^ In order to remove the disc, press the EJECT button and remove the disc from the player.
^ A disc that has been ejected but is still sitting in the remote CD player will be pulled back into the player after approximately 30 seconds.
^ This protects the disc and player from damage. The disc will not start playing.
^ All of the compact disc functions are controlled by the radio buttons except for EJECT.
^ When a disc is in the player, a CD symbol will appear on the display.
^ When a disc is playing, the letters CD will appear next to the CD symbol in the bottom left corner. The track number will also be displayed.
^ If the disc comes back out and ERR appears on the display, the problem could include one of the following reasons:
^ Upside down disc
^ A dirty, scratched, or wet disc
^ There is too much moisture in the air. Wait an hour and try again.
^ The vehicle is operating on a very rough road.

UNO/ULO: For a description of the RPO Code(s) shown in this article, refer to the RPO Code List found at Vehicle/Application and ID RPO Codes