Instrument Panel Cluster (IPC) - Replacement

Instrument Cluster Replacement

Removal Procedure





1. Remove the instrument cluster bezel.

* Four clips across the top edge, and four clips across the bottom edge, retain the bezel.
* For vehicles equipped with tilt wheel, move the steering column to the lowest position.
* For vehicles without tilt wheel, you may have to lower the column. Refer to Steering Column Replacement (All Except C3500HD) Steering Column Replacement (C3500HD) in Steering Wheel and Column.
* Disconnect the electrical connectors from the headlamp switch and the dimmer control and accessory switches.





2. Remove the four screws that retain the instrument cluster.
3. Remove the instrument cluster from the vehicle.
Keep fingers and other foreign objects away from the flexible circuit connections.



Installation Procedure





1. Install the instrument cluster into the instrument panel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the instrument cluster hold-down screws.

Tighten the instrument cluster hold-down screws to 1.6 N.m (14 lb in).

3. Connect the electrical connectors to the headlamp switch and the dimmer control and accessory switches.




4. Install the instrument cluster bezel.