Lubricant Replacement

Removal Procedure





1. Remove the front differential carrier shield, if equipped. Refer to Shield Replacement





2. Remove the fill plug (1) and the washer (2).
3. Remove the drain plug (3).
4. Drain the fluid from the differential.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the drain plug (3).
Tighten the drain plug (3) to 33 Nm (24 ft. lbs.).
2. Fill the differential. Refer to Capacities - Approximate Fluid.
3. Install the washer (2) and the fill plug (1).
Tighten the fill plug (1) to 33 Nm (24 ft. lbs.).





4. Install the front differential carrier shield. Refer to Shield Replacement.