Door Window Channel

Window Channel Replacement

Removal Procedure

1. Remove the door trim panel.

* Rear Side Door Trim Panel Replacement (Utility) Rear Side Door Trim Panel Replacement (Extended Cab P/U Only)
* Front Side Door Trim Panel Replacement

2. Remove the water deflector.




3. Remove the bolts that retain the front run channel to the door.
4. Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
5. Remove the front run channel from the door.
6. Slide the window forward.
7. Remove the bolts that retain the rear run channel to the door.
8. Carefully pull the front run channel in order to disengage the run channel from the window weatherstrip.
9. Remove the rear run channel from the door.

Installation Procedure




1. Install the rear run channel to the door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts that retain the rear run channel to the door.

Tighten the bolts to 10 N.m (88 lb in).

3. Slide the window rearward into the rear run channel.
4. Install the front run channel to the door.
5. Install the bolts that retain the front run channel to the door.

Tighten the bolts to 10 N.m (88 lb in).

6. Install the water deflector.
7. Install the door trim panel.

* Rear Side Door Trim Panel Replacement (Utility) Rear Side Door Trim Panel Replacement (Extended Cab P/U Only)
* Front Side Door Trim Panel Replacement