Fog Lamp Replacement - Front (Diamond Edition)

REMOVAL PROCEDURE




1. Turn the ignition key to the off position.
2. Remove the skid plate from the grille guard assembly.
3. Remove the radiator grille guard assembly.
4. Disconnect the electrical harnesses from the fog lamp assemblies.




5. Remove two bolts securing the fog lamp assembly to the grille guard.
6. Remove the fog lamp assembly.

INSTALLATION PROCEDURE




1. Install the fog lamp assembly to the grille guard with two bolts.

Tighten
Tighten the fog lamp bolts to 9 N.m (7 lb ft).

2. Connect the electrical harnesses to the fog lamp assemblies.




3. Install the radiator grille guard assembly.
4. Install the skid plate to the grille guard assembly.




5. Aim the fog lamps. Refer to Fog Lamp Aiming Procedure.

For a description of the RPO Code(s) shown in this article refer to the RPO Code List found at Vehicle/Application ID Application and ID