Information Bus: Description and Operation
DATA LINK COMMUNICATIONSDATA LINK COMMUNICATIONS CIRCUIT DESCRIPTION AND OPERATION
The Class 2 serial data link allows specified modules to transmit, receive, or exchange data:
- transfer case shift control module (TCSCM)
- electronic brake control module (EBCM)
- powertrain control module (PCM)
- body control module (BCM)
- instrument panel cluster (IPC)
- driver information center (DIC)
- inflatable restraint sensing and diagnostic module (SDM)
CIRCUIT DESCRIPTION
Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. In addition to this, Node Alive messages are transmitted by each module on the class 2 serial data circuit about once every 2 seconds. When the module detects the class 2 serial data circuit shorted, the setting of all other class 2 serial communication DTCs is inhibited and a U1300, U1301, or a U1305 DTC will set.