Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2003 >> Savana 1/2 Ton Van V6-4.3L VIN X >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Temperature Sensor/Switch (For Computer): Service and Repair

ENGINE COOLANT TEMPERATURE (ECT) SENSOR REPLACEMENT

REMOVAL PROCEDURE

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.

1. Turn OFF the ignition.
2. Remove the engine cover.
3. Drain the coolant below the level of the ECT sensor. Refer to Draining and Filling Cooling System in Cooling System.




4. Disconnect the electrical connector.




5. Carefully remove the ECT sensor.

INSTALLATION PROCEDURE

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.

1. Coat the threads with sealer GM P/N 9985253 or equivalent.




2. Install the ECT sensor.

NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.

Tighten
Tighten the ECT sensor to 20 N.m (15 lb ft).




3. Connect the ECT sensor harness connector to the ECT sensor.
4. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
5. Install the engine cover.
pro multis · About Operation CHARM