Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2004 >> Canyon 4WD L4-2.8L VIN 8 >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Transfer Case Neutral Switch Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case Neutral Switch Replacement

Transfer Case Neutral Switch Replacement

Removal Procedure





1. Raise and support the vehicle.
2. Disconnect the brown engine wiring harness electrical connector (1) from the brown NEUTRAL switch electrical connector (6).





3. Disconnect the brown NEUTRAL switch electrical connector (2) from the bracket (3).
4. Remove the transfer case NEUTRAL switch (1) and gasket (4) from the transfer case.

Installation Procedure

Notice: Refer to Component Fastener Tightening Notice in Service Precautions.





1. Install the transfer case NEUTRAL switch (1) and gasket (4) into the transfer case.
^ Tighten the neutral switch to 39 Nm (29 ft. lbs.).
2. Connect the brown NEUTRAL switch electrical connector (2) to the bracket (3).





3. Connect the brown engine wiring harness electrical connector (1) to the brown NEUTRAL switch electrical connector (6).
4. Lower the vehicle.
pro multis · About Operation CHARM