Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2004 >> Envoy 2WD L6-4.2L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Solenoid >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Variable Valve Timing Solenoid: Service and Repair

CAMSHAFT POSITION (CMP) ACTUATOR SOLENOID VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the drive belt.
2. Remove the 3 power steering pump bolts and move the pump out of the way.
3. Disconnect the camshaft position actuator solenoid electrical connector.
4. Remove the camshaft position actuator solenoid retaining bolt (3).
5. Remove the camshaft position actuator solenoid (2) from the engine block.
6. Clean debris from the hole (1).

INSTALLATION PROCEDURE




1. Install a new O-ring on the camshaft position actuator solenoid.
2. Lubricate the hole (1) with engine oil.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the camshaft position actuator solenoid (2) and bolt (3).

Tighten
Tighten the bolt to 10 N.m (89 lb in).

4. Connect the camshaft position actuator solenoid electrical connector.
5. Install the power steering pump and bolts.
6. Install the drive belt.
pro multis · About Operation CHARM