Fastener Tightening Specifications

TORQUE SPECIFICATIONS





Main Bearing Cap Bolts
Inner M10 bolts first pass 20 Nm (15 ft. lbs.)
Inner M10 bolts final pass 80 degrees
Outer M10 bolts/studs first pass 20 Nm (15 ft. lbs.)
Outer M10 bolts/studs final pass 51 degrees
Bearing cap side M8 bolts 25 Nm (18 ft. lbs.)

Crankshaft Balancer Bolt
First pass 50 Nm (37 ft. lbs.)
Second pass 140 degrees