Forward Servo Replacement
Forward Servo ReplacementRemoval Procedure
1. Remove the transmission filter.
2. Remove the forward servo cover bolts, cover, and gasket.
3. Remove the following parts:
1. Forward servo piston pin (5)
2. O-ring seal (4)
3. Servo piston (3)
4. Retainer (2)
5. Piston spring (1)
Installation Procedure
1. Install the following parts:
^ Piston spring (1)
^ Retainer (2)
^ Servo piston (3)
^ O-ring seal (4)
^ Forward servo piston pin (5)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the forward servo gasket, cover, and bolts.
^ Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Install the transmission filter.