Automatic Transmission - Allison

Park/Neutral Position Switch Replacement

PNP Switch Removal
Refer to Park/Neutral Position Switch Removal.

PNP Switch Install
Refer to Park/Neutral Position Switch Installation.

7. Notice:
Refer to Transmission Selector Shaft Abuse Notice in Service Precautions.

Reinstall shift lever (2). Install nut (3), by hand, on the end of selector shaft (4). Use a wrench (1) to keep the shift lever from rotating.
^ Tighten nut (3) to 24 Nm (18 ft. lbs.).

8. Reconnect the shift selector linkage/cable to the shift lever (2).
9. Connect the external wiring harness to the PNP switch.