Weatherstrip Replacement - Side Door Opening

Weatherstrip Replacement - Side Door Opening

Removal Procedure

1. Open both doors.
2. Remove the sill plate.
3. Remove the hinge pillar trim pillar.
4. Remove the windshield pillar molding.




5. Remove the weather-strip from the rear side door pinch-weld flange.

Installation Procedure




1. Install the weather-strip from the rear side door opening fully seating the weather-strip into the pinch-weld flange.
2. Install the windshield pillar molding.
3. Install the hinge pillar trim pillar.
4. Install the sill plate.
5. Inspect the door closing effort and seal to door fit.