104. Park Pawl Installation

Park Pawl Installation





1. Align the tang in C5 return spring assembly (1) with the notch in the main housing.
2. Install C5 piston return spring assembly (1)
3. Install apply assembly guide (3).
4. Install pawl support pin (2) into the main housing.





5. Install pawl return spring (2) onto park pawl (1).
6. Align the park pawl, pawl return spring toward the rear, with support pin (3).
7. Install park pawl (1) onto pawl support pin (3).
8. Connect pawl return spring (2) to the main housing.