51. C1 Clutch Backplate Inspection

C1 Clutch Backplate Inspection





Important: Measure as described below at a minimum of 3 locations. Replace the C1 clutch backplate if it does not meet specifications.

1. Measure the wear surface thickness of C1 clutch backplate (1) at dimension A. For minimum thickness.
2. Refer the C1 Clutch backplate table Selective Components Specifications, for the correct size backplate.





Important: Check the backplate for coning on a level surface.

3. Measure the cone of backplate (1) at dimension A.
4. Replace backplate (1) if any cone is measured.