7. Front and Rear Housings

Front and Rear Housings
1. Clean the transmission housings in a suitable cleaning solvent. Air dry the housing.
2. Inspect the countershaft bearing race bore for the following conditions:
^ Wear
^ Scratches
^ Grooves
3. Replace the housing if the countershaft bearing race bore is worn or damaged.
4. Inspect the housing for the following conditions:
^ Cracks
^ Damaged threads
^ Nicked mounting surfaces
^ Burrs
^ Scratches
5. Replace a cracked housing.
6. Clean up damaged threads with the correct size tap.
7. Replace the housing if scratches, grooves or scoring cannot be removed with a soft stone or a crocus cloth.
8. Inspect the machined mating surfaces for flatness. Check the mating surfaces with a straight edge.