Wiper Arm Replacement - Rear
WIPER ARM REPLACEMENT - REARREMOVAL PROCEDURE
IMPORTANT: Note the location of the wiper on the glass before removal.
1. Disconnect the washer hose.
2. Swivel the wiper arm cover open.
3. Remove the nut retaining the wiper arm to the wiper motor.
4. Remove the wiper arm from the liftgate.
INSTALLATION PROCEDURE
1. Align the wiper arm to the vehicle.
2. Install the nut retaining the wiper arm to the wiper motor.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nut to 23 N.m (17 lb ft).
3. Swivel the wiper arm cover closed.
4. Connect the washer hose to the wiper arm.
5. Check the rear wiper for proper operation.