Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Transfer Case Speed Sensor Replacement - Front
Transfer Case Speed Sensor Replacement - Front
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Disconnect the front speed sensor electrical connector (5).
3. Remove the front speed sensor.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the front speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).
2. Connect the front speed sensor electrical connector (5).
3. Install the transfer case shield, if equipped.