Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2006 >> Canyon 4WD L5-3.5L VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor (KS) 1 Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Knock Sensor (KS) 1 Replacement



KNOCK SENSOR (KS) 1 REPLACEMENT

REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.




2. Disconnect the engine wiring harness electrical connector from the KS (2).
3. Remove the KS retaining bolt.
4. Remove the KS (2) from the engine block.

INSTALLATION PROCEDURE




1. Install the KS (2) and the retaining bolt to the engine block, positioning the electrical terminals down.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the knock sensor (KS) bolt to 25 N.m (18 lb ft).

2. Connect the engine wiring harness electrical connector to the KS (2).
3. Lower the vehicle.
pro multis · About Operation CHARM